Cleaning will be the most crucial step when you want to maintain your bike correctly. And when you know the right way to clean your bike, the machine will work just as you want it. Similar to other mechanical tasks, there are right and wrong steps for scrubbing your motorbike. If you follow the steps mentioned below, you will know the proper steps for cleaning your bike.
Remove The Chunks By Hand
Before cleaning the bike, you should wash out the dried mud by hand. You may use your fingers to dig out the dried soil. Use a rubber mallet or similar tender object to dislodge the dirt. Never use metal scrapers, screwdrivers, and similar things.
Use a Mild Detergent
You may use a mild detergent like dishwashing liquid to clean your bike. The debris, dirt, and mud are easily cleaned with the dishwashing liquid. The liquid will never leave the filth on the metal or scuff out the plastic parts. Most retailers sell this washing liquid, and they are affordable. You should mix the little dishwashing liquid with warm water and use a soft-bristled brush to remove the dirt.
Avoid Abrasives
Abrasive detergent or caustic cleaners may leave a residue on your bike and hamper the beautiful finish. Though the abrasive cleaners quickly clear off tough scuff marks, they will damage the plastic parts. Be careful if you have dirt bike graphics kits for Kawasaki because you don’t want to damage them.
Take Extra Care When Pressure Washing
If you use the pressure washer on your bike, you should be extra careful. Though the washer may speed up the process, it may provide extra muscle strength if you are not careful. The head stem, wheel bearings, and chain should avoid direct spray from the pressure washer. The pressurised water may damage the seals, and the water may infiltrate, resulting in corrosion. While cleaning, passing water by narrow streams is alright, but when water comes by force for a more extended period, it may damage the bike’s parts.
Use a 40-Degree Nozzle
If you use a pressure washer, try using a 40-degree nozzle. With the help of the nozzle, a larger area will be covered within a short period. It would be best if you never used a 0-degree nozzle where a massive blast of water directly damages your bike. Prepared to replace some plastic parts and graphics when using a 0-degree nozzle to clean your bike.
Use a Muffler Plug and Airbox Washer
When using the airbox washer, you should remove the air filter and install the cover to prevent water from entering your engine. The muffler plug also guards against damaging the packing of the muffler.
Conclusion
To maintain your bike correctly, you should clean it regularly. It would help if you cleaned the dried mud with the help of your fingers and then used mild dishwashing liquid to clean your bike. Ensure that you are not providing a direct blast of water through zero degrees nozzle and damaging the graphics and the plastic parts. After all, your bike is essential to you, so follow the tips and then wash your bike.